The all-new Milled Grind 2 wedges combine precision-milling with Raw Face Technology designed for increased spin, precision and feel. While the face rusts over time, the rest of the head will maintain its original finish.
Raw Face Design
Omitting plating from the face and grooves allows for more precise geometry optimizing spin and feel.
ZTP RAW Groove Design
Sharper, Deeper, Narrower Groove, sharper radii engineered for more greenside spin.
Thick-Thin Head Design
Mass placement for enhanced feel while optimizing CG location for precise flight.
Laser Etched Pattern
Laser etching between the grooves on the raw face creates a rougher surface for more greenside spin.
Milled Grind
Milled Grind wedges ensure precision where it matters most. The milling process maximizes consistency, maintaining tolerance levels difficult for a human to repeat.
TPU Insert
The TPU insert in the back cavity is designed to provide vibration dampening to create a solid, positive feel at impact.
Low Bounce
Features a narrow crescent shape low bounce allowing maximum green side versatility.
Standard Bounce
An all-purpose grind and designed for players that like to rotate the club face open and shut.
FITTING BY SOLE GRIND. PLAY ANY SHOT, IN ANY CONDITION.
Specifications
| Loft |
Length |
Bounce |
Lie |
Hand |
Swing Weight |
| 48° |
35.75" |
9° |
64° |
RH |
D3 |
| 50° |
35.5" |
9° |
64° |
RH/LH |
D3 |
| 52° |
35.5" |
9° |
64° |
RH/LH |
D3 |
| 54° |
35.25" |
11° |
64° |
RH/LH |
D5 |
| 54° |
35.25" |
8° |
64° |
RH |
D5 |
| 56° |
35.25" |
12° |
64° |
RH/LH |
D5 |
| 56° |
35.25" |
8° |
64° |
RH/LH |
D5 |
| 58° |
35" |
11° |
64° |
RH |
D5 |
| 58° |
35" |
8° |
64° |
RH |
D5 |
| 60° |
35" |
10° |
64° |
RH/LH |
D5 |
| 60° |
35" |
8° |
64° |
RH/LH |
D5 |
Shaft & Grip Option
Steel - True Temper Dynamic Gold S200
TM Lamkin Crossline Soft Cord 0.580
TaylorMade Milled Grind 2 Chrome Wedge is used by the following players:
